Unexpected quality issues often occur during the production process of PE pipes, usually due to problems with equipment or raw materials. Based on our factory's years of experience in producing PE pipes, we will now introduce the common causes and solutions for abnormalities and problems in PE pipes.
When using PE pipes, abnormal situations may occur. Based on the analysis of the causes of these abnormalities, the following suggestions are proposed:
1. PE pipes can use products from well-known manufacturers, and the quality can be guaranteed. Please rest assured to choose our products.
2. Install a voltage regulator in front of each product to ensure that the input voltage remains stable at all times.
3. The electric fusion welding machine should be inspected and calibrated once a year.
4. The connecting end faces of PE pipes and fittings should be kept clean, dry, and oil-free.
5. When connecting, guide the pipe end into the heat sleeve without rotation, insert it to the marked depth, and at the same time, push the pipe fitting onto the heating head without rotation to reach the specified mark. The heating time should meet the requirements in the table above.
6. The newly welded joint must not rotate.
In short, it is important to pay attention to the protection of PE pipes in order to prevent any abnormalities. You should also look for reputable and legitimate manufacturers to purchase from. Do not purchase inferior goods for the sake of cheapness.